Electric Privacy Film
Technical Information
Film Construction
Two outside layers of Polyester coated
with a transparent conductive coating. The conductive coatings
both face inward. An inner layer of liquid crystals surrounded
by a polymer matrix.
| Glass Construction |
| |
Two outside layers of strengthened
glass.
Two layers of Polyurethane laminating adhesive inside
the glass.
3M Privacy Film in the Center.
Polyurethane thickness (one layer) .025 Inches (.635 mm)
|
| |
|
|
| Electrical Information |
| |
Power Consumption |
Less than 1 Watt per Square Ft. |
| |
Current Consumption |
25 ma per sq. ft. |
| |
Input Voltage minimum |
0 Volts AC |
| |
Minimum Voltage Required |
80 Volts AC |
| |
Operating Voltage |
120 Volts AC |
| |
Power Type |
Alternating Current |
| |
Frequency Range |
50 to 100 Hertz |
| |
Connector placement |
One side with wires exiting corner |
| |
|
|
| Wire size |
24 guage |
| |
|
|
| Switching speed |
< 1 sec |
| |
From frosted to clear |
3-12 milliseconds |
|
From clear to frosted |
15-25 milliseconds |
| |
|
|
| Operating Temperatures |
-20 Degrees C to + 60 Degrees C |
|